Supercoat™ Platinum Series Paint

Supercoat™ Platinum Series - Acrylic Exterior/Interior

Whether you have chosen a Cementitious Texture or an Acrylic Texture, it is a requirement of either system that two coats of Supercoat™ Paint be used as the final coats. This ensures excellent U.V. protection, weather resistance, colour continuity and ensures that the surface particles are sufficiently bonded together.


The Supercoat™ paint range is weather-proof, but allows microscopic vapour to pass, allowing a building to “breathe” and vent off any excess internal humidity, without letting liquid water pass through from the outside.



Supercoat™ Platinum Series - Flat Finish

This type of interior paint has a matte surface. This paint finish is usually used on interior walls. It’s especially good if you have to camouflage small wall bumps, cracks, or other imperfections as this finish does not reflect light.

Supercoat™ Platinum Series - Low Sheen Finish

If you can picture the very low sheen of the shell of an egg, you have an idea of how Supercoat™ Low Sheen paint finish will appear. With only a slight hint of shine or gloss, it’s good for walls and holds up better with cleaning than a Flat finish paint. The perfect choice for your exterior Supercrete™ wall finish.

Supercoat™ Platinum Series - Semi Gloss Finish

The Supercoat™ Semi gloss paint is most often used on doors, trim, and cabinets in kitchens and bathrooms. It is easily cleaned and lays down a nice, subtle shine, without being too glitzy. Take care with surface preparation work, as poorly prepared surfaces can be a bit distracting when highlighted by our Semi Gloss surface.

Supercoat™ Platinum Series - Gloss Finish

Our High gloss paints have an almost reflective quality, as their shiny finish mimics the look of enamel or plastic. Though not widely used in home interiors, it is becoming more popular for a dramatic look on cabinets, trim, and furniture in very formal and contemporary settings. This finish will magnify any surface imperfections, so careful preparation and sanding is essential before painting with Supercoat™ High Gloss paints.

Supercoat™ Ceiling White

Supercoat™ Ceiling White is an Acrylic interior coating for use on internal ceilings. Supercoat™ Ceiling White is a highly durable premium Ceiling White developed using Long Life Protective Coating Technologies. It provides excellent coverage, is easy to apply and flows on with a brush or roller. This product can also be spray applied. For use on primed fibre and particle boards, wallpaper, timber and modified plaster.

Supercoat™ Primer Sealer Undercoat

Supercoat™ Primer Sealer Undercoat is a highly durable, sandable, high build Styrene Acrylic developed using Long Life Protective Coating Technologies. Supercoat™ Primer Sealer Undercoat provides excellent coverage, is easy to apply and flows on with a brush or roller. This product can also be spray applied. For use on wallboards, fibre and particle boards, wallpaper, timber, weatherboards, block work, stucco roughcast plaster, concrete and modified plasters.

Supercoat™ Surface Sealer

This low viscosity Acrylic sealer has excellent surface penetration. Supercoat™ Surface Sealer is designed to even out the suction rate across surfaces prior to the application of the subsequent Acrylic layers. Uneven suction rates in rendered substrates (especially over irregular Supercoat™ Superadobe finishes) can cause patching in the final Acrylic paint coats due to pigmentation changes caused by differing rates of suction of the underlying rendered substrate. The Supercoat™ Surface Sealer serves a dual purpose in that it also increases the spread rates of the subsequent Acrylic layers due to the hard, smooth surface it leaves behind.



Supercoat™ Protective Coating Systems

Supercoat™ Elastoshield

A specially formulated breathable elastomeric coating for use on most building envelopes. A high viscosity, pure acrylic, incorporating fillers, extenders and fungicides for increased durability. Designed for great adhesion and corrosion resistance with a strong elastomeric membrane providing maximum weather durability under extreme conditions. For coating suitable external surfaces requiring an elastomeric membrane topcoat with excellent micro fissure crack spanning capabilities.

Supercoat™ Supershield Plus

A specially formulated long life, high build coloured topcoat for use over most masonry substrates. Formulated using the latest water borne pure Acrylic polymer technology, containing fungicides, ceramic oxide pigments for extended durability with a unique PTFE technology self cleaning system. This is the final colour coat providing a Matte finish. Designed for maximum durability against Ultra Violet light, high humidity and erosion from strong winds and driving rain. The Supercoat™ Supershield Plus contains light fast pigments and is Alkali resistant. This product has been formulated to create a barrier against moisture ingress whilst still allowing the building to breathe.

Supercoat™ Galvanised Iron Primer

Supercoat™ Galvanised Iron Primer is a highly durable high build Styrene Acrylic developed using Long Life Protective Coating Technologies. Supercoat™ Galvanised Iron Primer provides excellent coverage, is easy to apply and flows on with a brush or roller. This product can also be spray applied. For use on Galvanised Iron, Galvalume and Zincalume.

Supercoat™ Galvanised Iron Topcoat

Supercoat™ Galvanised Iron Topcoat is a highly durable, high build pure Acrylic developed using Long Life Protective Coating Technologies. Supercoat™ Galvanised Iron Topcoat provides excellent coverage, is easy to apply and flows on with a brush or roller. This product can also be spray applied. For use as a coloured top coat over Supercoat™ Galvanised Iron Primer.